Displaying The Filter Status; Selecting Gain, Color Temperature, And White Balance Values - Sony SRW-9000 Operation Manual

<FORMAT MEMORY> page
Move the cursor to the item you want to select,
and press the MENU SEL/ENTER dial to change
the registered format.

Displaying the Filter Status

Select 00:NO ASSIGN if you want to make the
selected number into an empty number.
Displaying the Filter Status
To respond to various lighting conditions, optical
neutral density (ND) filters and optical color
temperature conversion (CC) filters are built into
this unit. The selectable filters are identified with
the following alphanumeric codes.
Indication Selected Indication Selected
filter
ND:1 CLEAR CC:A
ND:2 ND0.6 CC:B
1
( / ND)
4
ND:3 ND1.2 CC:C
1
( / ND)
16
ND:4 ND1.8 CC:D
1
( / ND)
64
ND:5 CAP CC:E
On the subdisplay, you can check the filters
selected with the filter selector knobs.
Optical filter status page
1
3
1: The selected ND filter is displayed.
2: Displays the type of the selected filter.
3: The selected CC filter is displayed.
4: Displays the color temperature corresponding
When the optional HKSR-9004 is installed, ND
and CC filters can be switched on this page.
The setting items and values in Cine mode and
Custom mode are different.
In Cine mode: Gain setting page
1: You can select the gain value from among the
2: Displays either a dynamic range or a latitude
filter
3200K
(Clear)
On the second line, the color temperature filter is
4300K
selected from TUNGSTEN (factory default) or
DAYLIGHT.
5600K
With DAYLIGHT, electrical gain 5600K is on.
The white balance is fixed at the preset value
6300K
(3200K).
In Custom mode: Gain setting page
ND0.3
1
( / ND)
2
The first line is in common with Cine mode (page
47).
2
3: Turn on/off electrical gain 5600K (the factory
4: Select the white balance setting (the factory
4
to the filter selected at 3.
Selecting Gain, Color
Temperature, and White Balance
Values
1
following: –6 dB, –3 dB, 0 dB, 3 dB, 6 dB, 9
dB, and 12 dB (the factory default is 0 dB).
The corresponding ISO sensitivity is
displayed in parentheses.
(see "ISO sensitivity and dynamic range
indications" (page 48)).
3
default is off).
default is W:P).
Basic Settings with the Subdisplay
2
4
47