Mounting On A Tripod - Sony SRW-9000 Operation Manual

a)
Audio input
HDSDI signal
generator, VTR
a) 75 Ω coaxial cable
HDSDI
output
HDSDI
input

Mounting on a Tripod

Two tripod receptacles (for
are provided on the riser plate at the bottom of the
unit.
3
Tripod receptacles ( / ")
8
Notes
• Select an appropriate hole, considering the balance of
the weight of the unit. If an inappropriate hole is
selected, the unit may fall over.
• Check that the size of the selected hole matches that of
the screw of the tripod. If they do not match, the unit
cannot be attached to the tripod securely.
To use the optional VCT-14 Tripod
Attachment
Remove the riser plate, and use the supplied six
screws to attach the supplied V-shoe plate in the
position indicated in the figure.
V-shoe plate (supplied)
3
/ " camera screws)
8
Mounting on a Tripod 35