Checking The Last Three Seconds Of The Recording -Recording Review; Checking The Recording On A Color Video Monitor -Playback In Color - Sony SRW-9000 Operation Manual

3
Turn the SELECT/ENTER dial to
select "VARI", and press the dial.
The "CH.COND" indication in the HOME
screen flashes in yellow.
4
Select ADJUST and press the SELECT/
ENTER dial.
The Tracking Adjust window appears.
5
While viewing the channel condition
display, turn the ADJUST knob or
SELECT/ENTER dial to adjust so that
the channel condition display lights in
green.
To release tracking control
Eject the cassette, or power the system off.
The setting of SERVO >TRACKING in the
SYSTEM Setup menu returns to "UNITY".
To automatically optimize the tracking
Select "AUTO" in step 3 of the procedure for
playback with manual tracking control.
Step 4 and following are not necessary.
When the tracking has been automatically
optimized, the tracking control is not released
even if the cassette is ejected or the system is
powered off.
Checking the Last Three Seconds
of the Recording –Recording
Review
When SYSTEM Setup >SERVO >REC
REVIEW in the VTR menu is set to NORM (the
factory default), you can review the last three
seconds of the recording. Pause the recording and
simultaneously press the FUNC and PLAY
buttons on the control panel. The last three
seconds of the recording are played back in the
viewfinder. You can also keep the FUNC +
PLAY buttons pressed to rewind the tape. The
unit rewinds the tape for as long as you keep the
buttons pressed (up to 10 seconds), and then
begins playback.
When SYSTEM Setup >SERVO >REC
REVIEW is set to ALL, you can review the whole
cut. Pause the recording and press the FUNC +
PLAY buttons. The unit rewinds to the start of the
last cut and plays it back.
The REC REVIEW function can also be assigned
to the assignable buttons.
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 51).
Note
The recording review functions only works if the
recording you have made is at least three seconds long.
Checking the Recording on a
Color Video Monitor –Playback in
Color
Connect an HD color video monitor with an
HDSDI input connector to the HD SDI MON1
connector or the HD SDI MON2 connector of the
camcorder. By pressing the PLAY button, you
can view the recorded picture of high quality.
The signals output from these connectors depend
on menu settings.
Playback – Checking the Recording 93