Table of Contents
Advertisement
Setting the Status
Display on the
Viewfinder Screen and
the LCD Monitor
This section explains the menu settings for the
display of the viewfinder screen. These settings
are also used for the display of the LCD monitor
in the same way.
Selecting the display items
To select the items to be displayed on the
viewfinder screen (with the viewfinder
DISPLAY of the DISPLAY/ASPECT switch set
to ON) and the LCD monitor, use the VF DISP 1,
VF DISP 2, and VF DISP 3 pages of the
OPERATION menu.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the VF DISP 1, VF DISP 2, or
VF DISP 3 page of the OPERATION
menu, and press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 113.
2
Select the desired setting item, and
press the MENU knob.
On the VF DISP 1, VF DISP 2, and VF DISP
3 pages, you can select any of the following
items to turn its display on or off.
VF DISP 1 page
Item
VF DISP
VF DISP MODE
DISP EXTENDER
DISP FILTER
DISP WHITE
DISP CC 5600K
DISP GAIN
124
Setting the Status Display on the Viewfinder Screen and the LCD Monitor
Description
Turns viewfinder
display items on or
a)
off.
Selects the display
b)
mode.
Extender indicator
Types of the ND filter
White balance
memory indicator
Electric CC filter
indicator
Gain indicator
Item
Description
DISP SHUTTER
Shutter speed and
ECS mode indicator
DISP AUDIO
Audio level indicator
DISP TAPE
Remaining disc
capacity indicator
a) Viewfinder display items can be also turned on or
off by pushing the DISPLAY/ASPECT switch
on the viewfinder up to the DISPLAY side.
b) For detailed information on the display mode, see
"Change confirmation/adjustment progress
messages" (page 125).
VF DISP 2 page
Item
Description
DISP IRIS
Iris opening indicator
DISP ZOOM
Zoom position
indicator
DISP COLOR TEMP Displays the color
temperature.
DISP BATT
Displays the battery
a)
REMAIN
voltage/remaining
capacity of an internal
battery pack or an
external battery
connected to the DC
IN connector.
DISP DC IN
Displayed when the
power is supplied
from an external
battery connected to
the DC IN connector.
DISP WRR RF LVL
Displays the reception
level of the wireless
microphone.
DISP TIME CODE
Displays the
timecode.
DISP PB MIX
Playback mix function
indicator
a) When an Anton Bauer battery system or a BP-
GL65/GL95 battery pack is installed, the
remaining battery power is shown as a
percentage value (%) according to the setting of
this item.
INT: When one of the above batteries is
installed, the remaining power is shown as a
percentage value (%) when there is a change
in the value or when the power is low.
AUTO: The remaining power is shown as a
percentage value (%) when one of the above
batteries is installed. Otherwise the voltage
(VOLT) is displayed continuously.
Advertisement
Table of Contents
