Unpacking Instructions; Hardware Configuration - Motorola MVME1603 Installation And Use Manual

Unpacking Instructions

1
Unpacking Instructions
!
Caution

Hardware Configuration

1-6
Note If the shipping carton is damaged upon receipt, request that
the carrier's agent be present during the unpacking and
inspection of the equipment.
Unpack the equipment from the shipping carton. Refer to the packing list
and verify that all items are present. Save the packing material for storing
and reshipping of equipment.
Avoid touching areas of integrated circuitry; static discharge
can damage circuits.
To produce the desired configuration and ensure proper operation of the
MVME1603/1604, you may need to carry out certain modifications before
installing the module.
The MVME1603/1604 provides software control over most options: by
setting bits in control registers after installing the MVME1603/ 1604 in a
system, you can modify its configuration. (The MVME1603/1604 control
registers are described in Chapter 3, and/or in the MVME1603/MVME1604
Single Board Computer Programmer's Reference Guide as listed under
Related Documentation in Appendix A.)
Some options, however, are not software-programmable. Such options are
controlled through manual installation or removal of header jumpers or
interface modules on the base board or the associated modules.