Motorola MVME1603 Installation And Use Manual page 164

Hide thumbs Also See for MVME1603:
Table of Contents

Advertisement

ENV - Set Environment
6
6-8
ROM Boot Enable search of VMEbus [Y/N] = N?
VMEbus address space, in addition to the usual areas
Y
of memory, will be searched for a ROMboot module .
VMEbus address space will not be accessed by
N
ROMboot. (Default)
ROM Boot Abort Delay = 5?
The time in seconds that the ROMboot sequence will delay before
starting the boot. The purpose for the delay is to allow you the option
of stopping the boot by use of the
0-255 seconds. (Default = 5 seconds)
ROM Boot Direct Starting Address = FFF00000?
The first location tested when PPCBug searches for a ROMboot
module. (Default = $FFF00000)
ROM Boot Direct Ending Address = FFFFFFFC?
The last location tested when PPCBug searches for a ROMboot
module. (Default = $FFFFFFFC)
Network Auto Boot Enable [Y/N] = Y?
The Network Auto Boot (NETboot) function is
Y
enabled. (Default)
The NETboot function is disabled.
N
Network Auto Boot at power-up only [Y/N] = N?
NETboot is attempted at power-up reset only.
Y
NETboot is attempted at any reset. (Default)
N
key. The time value is from
BREAK

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mvme1604

Table of Contents