Mvme1600-011 Connectors; Vmebus Connector P2; Scsi Connector - Motorola MVME1603 Installation And Use Manual

MVME1600-011 Connectors

MVME1600-011 Connectors
4

VMEbus Connector P2

SCSI Connector

4-24
The following tables summarize the pin assignments of connectors that are
specific to MVME1603/MVME1604 modules based on the MVME1600-
011 base board, used with MVME712M transition modules.
Two 96-pin connectors (P1 and P2) supply the interface between the base
board and the VMEbus. P1 provides power and VME signals for 24-bit
addressing and 16-bit data. Its pin assignments are set by the VMEbus
specification. P2 rows A and C provide power and interface signals to the
MVME712M transition module. P2 row C supplies the base board with
power, with the upper eight VMEbus address lines, and with an additional
16 VMEbus data lines. The pin assignments for P2 are listed in the
following table.
The SCSI connector for the MVME1600-011 base board is a 50-pin
connector located on the front panel of the MVME712M transition
module. The pin assignments for the SCSI connector are listed in Table 4-
19.