EMC Compliance
The MVME1603/MVME1604 Single Board Computer was tested in an
EMC-compliant chassis and meets the requirements for EN55022 Class B
equipment. Compliance was achieved under the following conditions:
For minimum RF emissions, it is essential that the conditions above be
implemented. Failure to do so could compromise the EMC compliance of
the equipment containing the module.
Shielded cables on all external I/O ports.
Cable shields connected to earth ground via metal shell connectors
bonded to a conductive module front panel.
Conductive chassis rails connected to earth ground. This provides
the path for connecting shields to earth ground.
Front panel screws properly tightened.
Specifications
B
B-3