Table of Contents
Advertisement
Unpacking Instructions
1
Unpacking Instructions
!
Caution
Hardware Configuration
1-6
If the shipping carton is damaged upon receipt, request
Note
that the carrier's agent be present during the unpacking
and inspection of the equipment.
Unpack the equipment from the shipping carton. Refer to the
packing list and verify that all items are present. Save the packing
material for storing and reshipping of equipment.
Avoid touching areas of integrated circuitry; static
discharge can damage circuits.
To produce the desired configuration and ensure proper operation
of the MVME1603/1604, you may need to carry out certain
modifications before installing the module.
The MVME1603/1604 provides software control over most options:
by setting bits in control registers after installing the MVME1603/
1604 in a system, you can modify its configuration. (The
MVME1603/1604 control registers are described in Chapter 3,
and/or in the MVME1603/MVME1604 Single Board Computer
Programmer's Reference Guide as listed under Related Documentation
in Appendix A.)
Some options, however, are not software-programmable. Such
options are controlled through manual installation or removal of
header jumpers or interface modules on the base board or the
associated modules.
Advertisement
Table of Contents
