Motorola MVME1603 Installation And Use Manual page 170

ENV - Set Environment
6
6-14
Slave Enable #1 [Y/N] = Y?
Yes, set up and enable the Slave Address Decoder #1.
Y
(Default)
Do not set up and enable the Slave Address Decoder
N
#1.
Slave Starting Address #1 = 00000000?
Base address of the local resource that is accessible by the VMEbus.
(Default = $0, base of local memory)
Slave Ending Address #1 = 03FFFFFF?
Ending address of the local resource that is accessible by the VMEbus.
(Default = end of calculated memory)
Slave Address Translation Address #1 = 80000000?
Enables the VMEbus address and the local address to differ. The value
in this register is the base address of the local resource associated with
the starting and ending address selection from the previous questions.
(Default = $80000000)
Slave Address Translation Select #1 = FE000000?
Defines which bits of the address are significant. A logical 1 indicates
significant address bits, and a logical 0 is nonsignificant. (Default =
$FE000000)
Slave Control #1 = 03FF?
Defines the access restriction for the address space defined with this
slave address decoder. (Default = $03FF)
Slave Enable #2 [Y/N] = N?
Yes, set up and enable the Slave Address Decoder #2.
Y
Do not set up and enable the Slave Address Decoder
N
#2. (Default)
Slave Starting Address #2 = 00000000?