Unpacking Instructions - Motorola MCP750HA Series Installation And Use Manual

Table 1-1. Startup Overview (Continued)
Task
Note that the debugger
initializes the MCP750HA
Initialize the system clock.
Examine and/or change
environmental parameters.
Program the board as needed
for your applications.

Unpacking Instructions

Note
Unpack the equipment from the shipping carton. Carefully check the
packing list and verify that all items are present. Save the packing material
for storing and reshipping of equipment.
Avoid touching areas of integrated circuitry; static discharge can damage
circuits.
Caution
http://www.motorola.com/computer/literature
Section or Manual Reference
Using PPCBug
Note: You may also wish to obtain the PPCBug
Firmware Package User's Manual and the
CPX750HA PPCBug Firmware User's Manual
listed in Appendix C, Related
Using PPCBug
SET command
Chapter 6, CNFG and ENV Commands
MCP750 Single Board Computer Programmer's
Reference Guide, listed in
Documentation
If the shipping carton is damaged upon receipt, request that the
carrier's agent be present during the unpacking and inspection of
the equipment.
Unpacking Instructions
Documentation.
Debugger Commands, and the
,
Appendix C, Related
1
1-5