Cnfg - Configure Board Information Block - Motorola MVME1603 Installation And Use Manual

CNFG - Configure Board Information Block

CNFG - Configure Board Information Block
6
6-2
Use this command to display and configure the Board Information Block,
which is resident within the NVRAM. The board information block
contains various elements detailing specific operational parameters of the
PowerPC board. The board structure for the PowerPC board is as shown in
the following example for an MVME1603-001:
Board (PWA) Serial Number
Board Identifier
Artwork (PWA) Identifier
MPU Clock Speed
Bus Clock Speed
Ethernet Address
Local SCSI Identifier
System Serial Number
System Identifier
The parameters that are quoted are left-justified character (ASCII) strings
padded with space characters, and the quotes (") are displayed to indicate
the size of the string. Parameters that are not quoted are considered data
strings, and data strings are right-justified. The data strings are padded
with zeroes if the length is not met.
The Board Information Block is factory-configured before shipment.
There is no need to modify block parameters unless the NVRAM is
corrupted.
Refer to the Programmer's Reference Guide (part number V1600-1A/PG)
for the actual location and other information about the Board Information
Block.
Refer to the PPCBug Firmware Package User's Manual (part number
PPCBUGA1/UM) for a description of CNFG and examples.
= "MOT001673590 "
= "MVME1603-001 "
= "01-w3015F01A "
= "066 "
= "033 "
= 08003E20C983
= "07"
= "1463725 "
= "Motorola MVME1603-00x"