KStar MEMO PLUS RT II (MP9100RTII-0.9) 1-3K User Manual page 29

the function setting key
more than half a second (less
than 2 seconds). Now, the load
shielding
setting is confirmed.
④
interface.
function setting key
than half a second (less than 2
seconds), exit from the setting
interface and return to main
interface.
① Enter the setting interface.
Press and hold the function
setting key
seconds, then come to setting
interface, Press and hold the
scroll key
second(less than 2 seconds),
select
choose
setting interface, the letters
E PO Input
"EPO" will flash.
0 T
Polarity
②Enter the EPO Input Polarity
setting （ 6）
0 T
setting interface. Press and hold
the function setting key
more than half a second(less
than 2 seconds) , the letters
"EPO" will stop flashing. The
letters below the "EPO" will
flash. Press and hold the scroll
key
second (less than 2 seconds),
select the EPO input polarity,
"+P"(open
EPO function) or "–P"(short
circuit execute EPO function)
③ Confirm the setting. After
selecting EPO input polarity,
press and hold the function
setting key
a second (less than 2 seconds).
Now, the setting is confirmed.
④Exit from the setting interface.
Press and hold function setting
key
second (less than 2 seconds),
exit from the setting interface
and return to main interface.
battery voltage
Exit from the
Press and
for more
for more than 2
for more than half a
the function setting,
EPO Input polarity
for more than half a
circuit execute
for more than half
for more than half a
29
for
setting
hold
for