Table of Contents
Advertisement
Bypass
function
② Enter
setting(2)
interface. Press and hold the
function setting key
than half a second(less than 2
seconds) at this time, the letters
"bPS" will stop flashing. The
"ON"(or OFF) below the bPS
will flash. Press and hold the
scroll key
second (less than 2 seconds) to
determine whether the BPS
function is enabled or disabled.
③ Confirm the BPS selecting
④ If you choose "OFF", then
go to step 7, otherwise go
ahead to step 5.
⑤
⑥ To set the minus range in the
⑦ After the minus range is
confirmed. Long press function
setting key
seconds to exit setting menu.
① Enter the setting interface.
Output
voltage
setting(3)
2 seconds, then come to
setting interface ,short press
the scroll key
than half a second (less than
2 seconds) to select BPS
setting, the letters "bPS"
will flash.
the
BPS
for more than half a
interface. After selecting ON
or OFF, press and hold the
function setting key
more than half a second
(less than 2 seconds). Now,
the BPS setting function is
completed and the "ON"
or
"OFF"
below
"bPS" will light without
flashing.
Set
the
BPS
range.
S hort press the scroll
0 T
key
or
for more than
0 T
half a second (shorter than 2
seconds)to
select
voltage range in percentage.
+5%,+10%,+15%,+25%(def
ault is +25%) ， then short
press function setting key
for more than half a
second
(shorter
seconds)to
confirm
selection, then to set the
minus range
same way.
for more than 2
Press and hold the function
setting key
for more than
2 seconds, then come to
setting interface, Press and
hold the scroll key
for more
setting
for more
for
the
tolerance
the
than
2
the
for
26
Hide quick links:
Advertisement
Table of Contents
