Table of Contents
Advertisement
T emperature
0 T
I nput
0 T
B attery
0 T
Battery
remaining time
User Settings
The UPS has setting functions. This user settings can be done under any kind of UPS working mode.
The setting will take effect under certain condition. Below table describes how to set the UPS.
Table 6. User Settings
D isplay the temperature of the
0 T
inverter in the UPS. As
following
graphics
temperature of the inverter is 37℃.
D isplay the voltage and frequency
0 T
of the input. As the following
graphics shown: the input voltage is
210v, input frequency is 49.8Hz.
D isplay the voltage and capacity of
0 T
the battery . As the following
graphics shown: the battery voltage
is 38v, the capacity of battery is
100 ％ (the capacity of battery is
approximately reckoned according
to the battery voltage).
D isplay the battery remaining time
0 T
when under battery mode. The
number is from 0 to 999 minutes. As
the following graphics shown: there
are 686 minutes left for discharging.
the
shown:
the
24
Hide quick links:
Advertisement
Table of Contents
