Table of Contents
Advertisement
Setting
function(serial
number)
① Enter the setting interface.
Press and hold the function
setting key
seconds, then come to setting
interface, the letters "ECO"
will flash.
② Enter
interface. Press and hold the
function setting key
than half a second(less than 2
seconds), the letters "ECO"
ECO function
will stop flash. The "ON"(or
setting(1)
OFF) below the ECO will flash.
Press
key
second (less than 2 seconds) to
determine whether the ECO
function is enabled or disabled.
③ Confirm the ECO selecting
interface. After selecting ON or
OFF,
function setting key
than half a second (less than 2
seconds). Now, the ECO setting
function is completed and the
"ON" or "OFF" below the
"ECO" will light without flash.
④ If you choose "OFF", then
⑤
⑥ To set the minus range in the
⑦ After the minus range is
confirmed. Long press function
setting key
seconds to exit setting menu.
① Enter the setting interface.
Setting procedure
for more than 2
the
ECO
and
hold
the
for more than half a
press
and
hold
go to step 7, otherwise go
ahead to step 5.
Set the ECO tolerance
range.
S hort press the scroll
0 T
key
or
for more than
0 T
half a second (shorter than 2
seconds)to
select
voltage range in percentage.
+5%,+10%,+15%,+25%(def
ault is +25%) ， then short
press function setting key
for more than half a
second
(shorter
seconds)to
confirm
selection, then to set the
minus range
same way.
for more than 2
Press and hold the function
setting key
for more than
setting
for more
scroll
the
for more
the
than
2
the
25
LCD display
Hide quick links:
Advertisement
Table of Contents
