Physical Description; Front View - GeoVision GV-VS01 Manual

1.2 Physical Description

1.2.1 Front View

1
No. Name
1 Video Input
2 Video Stream Switch
3 Audio Input
4 Speaker Output
5 Reset Button
6 Default Button
7 Power LED
8 Ready LED
9 Disk Full LED
2
2 3
Figure 1-1
Function
2 plugs for video inputs.
The switch is designed for 2 cameras mode in live view.
The switch is set in
VS01: dual streams of Video 1 are displayed.
VS02: Video 1 and Video 2 are displayed simultaneously.
2 plugs for audio inputs.
A plug for the speaker device.
It reboots the GV-Video Server, and keeps all current
configurations.
It resets all configurations to their factory settings.
To use this function, follow these steps:
(1) Press the Reset Button.
(2) Press and hold the Default Button until the 3 LED lights are on.
(3) Wait until the Disk LED is off and Ready LED is on. You
successfully return to the default settings.
This LED is on, indicating the power is supplied.
This LED is on, indicating the GV-Video Server is ready for
connection.
This LED is on, indicating the hard drive is full.
5 6
4
9
8
7