5.5.5.
WiFi (WLAN) – Site Survey
Figure 19 - WiFi (WLAN) -> Wireless Settings (Site Survey)
When the WiFi interface of the L-5500 unit operates in Client mode, this screen shows the
WiFi Access Point detected during last wireless scan.
The list is empty when the L-5500 unit is operating in Access Point mode.
5.6.
Router Settings
5.6.1.
Static Routes
The L-5500 will automatically set up routing to all devices on the same subnet. In some
cases however, the L-5500 unit may need to communicate with a previously existing subnet
other than its own. This route cannot automatically be generated; it must be manually
entered as a static route by the user. The static route gives the L-5500 its "next hop"
instructions.
Figure 20 - Router Settings Screen
Page 33
Need help?
Do you have a question about the L-5500 and is the answer not in the manual?