Provisioning With Sprint - Logic Data Systems L-5500 Manual

Note: Should you experience problems connecting to the web page, reset the L-5500 unit
by clicking RESET on the top right of the screen and try reconnecting to the web page.
4.4.2.

Provisioning with Sprint

L-5500 cellular routers configured for Sprint are set to activate by default without user
intervention. However, a manual activation may be initiated by performing the following
steps.
1. On the left side of the screen, select the Cellular (WAN) page. Select "Activation"
tab.
2. In the "Manual initiation of OMA-DM Provisioning" portion of the screen (Figure 7),
select "OMA-DM".
3. After a few moments you will receive a message saying the OMA-DM was successful.
Once OMA-DM is complete, the unit will reset.
4. Once the module is activated, browse to an Internet web page to confirm
connectivity.
Note: Should you experience problems connecting to the web page, reset the L-5500
unit by clicking RESET on the top right of the screen and try reconnecting to the web
page.
Figure 7 - Cellular (WAN) page, manual activation and auto activation for Sprint
Figure 8 - Cellular (WAN) page, Manual-Entry Activation
Page 16