Configuring Local Pc; L-5500 Radio Modem Setup - Logic Data Systems L-5500 Manual

4.3.2.

Configuring Local PC

1. Verify network settings on local PC are set to automatically detect IP and DNS
server. The path to network settings varies with the version of Windows you are
using.
Windows XP: Start-> Control Panel -> Network Connections
Windows 2000: Start -> Settings -> Network and dial up connections
2. Select the appropriate network connection, typically the Local Area Connection ->
right click on the connection and select "Properties"
3. Select "Internet Protocol (TCP/IP)" properties.
4. Verify that "Obtain an IP address automatically" and "Obtain DNS Server address
automatically" are selected.
4.3.3.

L-5500 Radio Modem Setup

1. Power on the L-5500 radio modem with 9-28VDC 15-Watt supply.
2. In an Internet browser, enter http://192.168.1.50. This will bring up the L-5500
product login page (Note: It may take 30 seconds from initial power-up for the
homepage to be available.)
3. Login to the device
Default Values:
4. This brings up the L-5500 product homepage. Status and configuration parameters
are viewed from this screen. The configuration options are further explained later in
this document.
User logon: admin
password: password
Page 13