Activation; Dial Settings - Logic Data Systems L-5500 Manual

SIM ID: ID of SIM card if inserted. Not applicable for modems configured for CDMA.
MDN/MTN: The Mobile Directory Number; assigned by the carrier when the module is
activated.
MIN/MSI: Mobile Identification Number, in most cases, this is the same as the MDN.
PRL: Preferred Roaming List; a database that declares the priority of other carriers while
roaming. This file should be updated periodically to ensure proper connectivity while
roaming. The PRL file can be updated by performing an OTA or IOTA operation (see
provisioning section).
SID: System ID, this is status only and is assigned by the carrier when connecting to the
network.
NID: Network ID; this is status only and is assigned by the carrier when connecting to the
network.
Signal Strength: Receive Signal Strength Indication indicates the strength of the network
signal with both a numerical value and a good/medium/poor message.
5.3.2.

Activation

Provisioning information (see section 4.4)
5.3.3.

Dial Settings

The Dial Settings page allows the user to Disable auto-connect. This page also contains
information on the reconnect timers in the note under the "Connect" selection. These
Figure 11 - Cellular (WAN) Page
Page 22