Country-Specific Requirements - Compaq StorageWorks Installation Manual

C-2 Compaq StorageWorks Fibre Channel Storage Hub 12 Installtion Guide

Country-Specific Requirements

Writer: Susan Caesar Project: Compaq StorageWorks Fibre Channel Storage Hub 12 Installtion Guide Comments:
Part Number: 340662-002 File Name: g-appc Power Cord Set Requirements.doc Last Saved On: 4/16/99 8:29 AM
Use the following table to identify the appropriate accredited agency in your
country.
Power Cord Set Requirements - By Country
Country
Australia EANSW
Austria OVE
Belgium CEBC
Canada CSA
Denmark DEMKO
Finland SETI
France UTE
Germany VDE
Italy IMQ
Japan JIS
Norway NEMKO
Sweden SEMKO
Switzerland SEV
United Kingdom BSI
United States UL
NOTE:
1. Flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm
Power cord set fittings (appliance coupler and wall plug) must bear the certification
mark of the agency responsible for evaluation in the country where it will be used.
2. Flexible cord must be Type SJT or equivalent, No. 16 AWG, 3-conductor. Wall plug
must be a two-pole grounding type with a NEMA 5-15P (15A, 125V).
3. Appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration
number in accordance with the Japanese Dentori Law. Power cord set must be rated
minimum 12A, 100V. Flexible cord must be Type VCT or VCTF, 3-conductor, 1.25
2
mm conductor size. Wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (15A, 125V) configuration.
Compaq Confidential – Need to Know Required
Table C-1
Accredited Agency
1
1
1
2
1
1
1
1
1
3
1
1
1
1
2
Applicable Note Numbers
2
conductor size.