Features and Benefits Features Benefits Connect All Your switch is the center of the network, and you Your can connect up to five computers per switch on Computers a single network. Every port on the Ethernet Switch can be used as an uplink port. Easy-to-Read Easy-to-read LED lights let you easily diagnose LEDs...
What’s in Front? LED (Color) Description PWR (Green) On: System power on Off: System power off COL (Amber) Off: No collision Flash: Collision LINK/ACT (Green) On: Link up Off: Link down Flash: Data transmitting/receiving 100 (Amber) On: 100 Mbps Unlighted: 10 Mbps PAQ N 10/100 F ETWORKING...
What’s in Back? Five RJ-45 ports are available, each labeled with a port number. You can connect your Ethernet Switch to other hubs or switches using any port as an uplink port. The DC-jack power socket accepts exactly DC +5V power from the AC adapter (included) with input of 100VAC and 50-60Hz.
Connecting the Product PAQ N 10/100 F ETWORKING THERNET ENSING WITCH...
Page 11
Note: The cable length between your Ethernet Switch and hub/PC should not exceed 100 meters. If you will operate at 10 Mbps speed, use a Category 3 or 5 cable. If you will run your network at 100 Mbps, use a Category 5 cable or better. Note: Any type of hub or PC can connect to your Ethernet Switch by using straight-through wires (not included).
Technical Specifications Model HNE-400 Port (5) RJ-45, auto senses 10/100 speeds and full/half duplex Standards IEEE 802.3 10BaseT, IEEE 802.3u 100BaseTX, IEEE 802.3x Certifications FCC Part 15B, CE Cable 10BaseT Category 3 or better 100BaseTX Category 5 or better Access CSMA/CD Protocol Data Rate...
Page 13
Humidity: Operating: 10%-90% RH Storage: 5% - 90% RH External +5VDC/1000mA Power Adapter RJ-45 Pin Assignments: Port 1~5 Input Receive Data + Input Receive Data - Output Transmit Data+ Output Transmit Data- 4,5,7,8 Not used PAQ N 10/100 F ETWORKING THERNET ENSING WITCH...
Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Compaq Computer Corporation may void the user's authority to operate the equipment. Declaration of Conformity for products marked with the FCC logo - United States only This device complies with Part 15 of the FCC Rules.
Page 19
For questions regarding this product, contact: Compaq Computer Corporation P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-652-6672 (1-800-OK COMPAQ) For questions regarding this FCC declaration, contact: Compaq Computer Corporation P. O. Box 692000, Mail Stop 510101...
Page 20
(THIS PAGE INTENTIONALLY LEFT BLANK) PAQ N 10/100 F ETWORKING THERNET ENSING WITCH...
Need help?
Do you have a question about the iPAQ Networking and is the answer not in the manual?
Questions and answers