Polaris Sportsman 700 Efi 2005 Service Manual page 93

4. Install Flywheel Puller (PN 2871043) and remove
flywheel (F). CAUTION: Do not thread the puller
bolts into the flywheel more than 1/4" or stator
coils may be damaged.
2871043
5. Remove the starter bendix (G), wire holddown
plate (H), and the woodruff key (I) from the
crankshaft. The stator does not have to be
removed at this point.
I
G
6. Remove the gear/stator housing bolts and
remove the gear/stator housing cover (J) and
gasket from the crankcase. Be sure to catch the
excess oil from the crankcase.
F
H
J
7. Note the positions of the gears in the photo.
Camshaft Gear
Crank Gear
8. Use a white pen to accent the timing marks on the
following gears: camshaft gear (K), crankshaft
gear (M), or counterbalance gear (N) This will
ensure proper gear alignment and timing during
reassembly of the gears.
K
Timing Marks
M
ENGINE
Counterbalance Gear
Water Pump Gear
N
3.39