TRANSMISSION
C
B
E
Tighten Bolts In Sequence A through E
TRANSMISSION DISASSEMBLY
1. Place the bellcrank in neutral position.
Shift Shaft
Cover
NO TAG
Detent Pawl
Bellcrank
2. Remove the nut, and washer that secure the bell
crank. Remove the bellcrank.
3. Remove the e--clip and then remove the
transmission switch.
8.6
A
D
4. Remove the five bolts that secure the cover.
Remove the detent spring.
5. Mark the detent gear with a white pen. Remove the
detent gear from the case.
Case
Transmission
Switch
Spring