ENGINE FASTENER TORQUE PATTERNS
Tighten cylinder head/cylinder base, and crankcase fasteners in the following sequence outlined below.
22
2 ft. lbs.
±
(30
3 Nm)
±
CYLINDER HEAD BOLT TIGHTEN SEQUENCE
CRANKCASE BOLT TIGHTEN SEQUENCE
Lubricate threads and between washer and underside of bolt with engine oil.
Torque in sequence to spec provided, allow the gasket to set for 1 minute,
then tighten in sequence 90° (1/4 turn).
35
(47.5
3
6
4 ft. lbs.
±
+
90° (1/4 turn)
5.5 Nm)
±
1
2
ENGINE
5
4
3.11