Flow Diagram Control System - REMEHA Quinta 115 Technical Information

6.2 Flow diagram control system

press the 'm' -key
Operating mode,
see Par. 6.3
Setting mode,
user level,
see Par. 6.5
Setting mode,
service level,
see Par. 6.6
'code'-display
only digit or letter
0 - 9,h,l,b Flow temperature or shut-off code
digit or letter with
dot
!
@
#
A
u
service engineer level only:
$
%
^
&
*
(
B
C
D
press the 's'-key
Flow temperature set point
Pump run on time HTG
DHW temperature set point
Boiler control setting
n/a
Flow temperature set point during forced part
load
High limit temperature set point
Fan speed at full load (HTG)
Fan speed at part load (HTG and DHW)
Modulation start point dT (F/R)
Interface selection (control option)
DHW cut-in dT
Fan speed at full load (DHW)
intern
16
Remeha Quinta 115
tdisplay