Combined Key Functions (In Operating Mode Only) - REMEHA Quinta 115 Technical Information

a. 'code'-display
Indicates on user level:
Additional indication on
service level:
b. t-display
Indicates:
c. reset-key:
d. 'm' -key:
e. 's'-key:
e. 's'-key + r-
symbol:
f. 'e'-key:
f. e-key + k-symbol:
g. [+]-key:
g. [+]-key + q-symbol:
h. [-]-key:
h. [-]- key+ h-symbol:
Table 02 Control panel functions

6.1.3 Combined key functions (in operating mode only)

When the boiler is in the operating mode, keys with the illuminated symbols above
have a double function (Program and Switch).
To use them for a Program function press the key once - and for a Switch function
(either on or off) press the key and hold for 2 secs.
The status of the switch function will be confirmed by the illuminated symbol as
follows:
operating mode: only one digit 1
setting mode: digit with dot !
read-out mode: digit with flashing dot !
shut-off mode: letter b
forced full load: letter h
forced part load: letter l
speed mode: alternate half digit <
failure mode: flashing digit 1
Temperatures, settings, fault codes (flashing digits),
shut-off codes (flashing dots)
to reset after a lockout condition
Program function: key to select the required mode
Program function: key to select the required program
within the selected mode
Switch function: burner switch HTG (manual override)
Program function: key to save the settings
Switch function: burner switch DHW (manual override)
Program function: to select a higher setting
Switch function: pump manual override
Program function: to select a lower setting
Switch function: manual override (hand/auto)
14
Remeha Quinta 115