General Specification - REMEHA Quinta 115 Technical Information

Water resistance at 20°C dT
Nominal flow at 11°C dT
Nominal flow at 20°C dT
Electrical
Main supply
Electric rating without pump
Insulation class
Table 01 Technical data Remeha Quinta 115
* see par. 7.4.3

3.3 General Specification

(to be read with above table)
- One piece cast aluminium heat exchanger.
- 1¼" BSP (m) flow and return connections.
- ¾" BSP (m) gas connection.
- Maximum operating pressure of 4.0 bar.
- Maximum operating temperature of 90°C.
- Pre-mix, fully modulating (16 -100%) gas burner with gas/air ratio control for
maximum efficiency.
- Intelligent advanced boiler control 'abc' c/w a comprehensive operating, service
and fault diagnostic facility.
- Available for conventional flue or room sealed operation.
- Capable of remote BMS (0 -10V, on/off and High/low control options).
- Supplied fully factory assembled.
- Powder coated enamel steel casing.
- Suitable for use with Natural gas.
- Supplied as standard with safety interlock facility, temperature indication, control
and high limit sensors, common alarm and boiler run indication.
- Efficiency of 97 % at 80/60°C (Hi).
- Max. efficiency of 107.1 % (Hi) in fully condensing mode.
- Restrictor L-gas with assembly instructions.
- Manufactured to ISO 9001.
- CE approved.
mbar
l/s
l/s
V/Hz
W
IP
11
250
2.34
1.29
230 / 50
40 - 240
X0C