WPS-500/750-PTZ-A Installation Manual
3.10. Final Installation Instructions
1.
Connect the wiring connector to the camera.
2.
Twist the camera to reduce binding on the wiring harness, and twist the camera mounting tabs into the top mount.
3.
Twist the camera until the top cap holes line up to the holes in the camera.
4.
Secure the camera to the top mount using 3 screws.
5.
Remove any protective films or covers from the lens assembly. On the WPS-500-PTZ-A, remove the yellow tag from the
lens.
6.
For WPS-500-PTZ-A cameras, remove the protective film from the dome and twist the dome onto the camera until it is
hand tight.
WPS-500-PTZ-A
16
WPS-750-PTZ-A