Installation Instructions - Wirepath Surveillance WPS-300-BUL-A-GR Installation Manual

INSTALLATION INSTRUCTIONS

Recommended cabling includes solid copper RG59 or RG6 for video and 18
AWG two-conductor for power.
1. Prior to installation, it is
recommended to pre-adjust the
camera's bracket angle so the lens
points in the desired direction. It
is also recommended to connect
the camera to a display and pre-
adjust the zoom and focus (see
step 4). Taking these steps will speed
installation time.
2. Position the camera base at
the desired location and use
the provided screws to attach
the camera base to the wall or
ceiling.
3. Using the DC plug supplied,
connect the power supply jack to
12V DC and the BNC Video Output
to the desired video line.
© 2012 Wirepath Surveillance
WPS-300-BUL-A Installation Manual
DC Plug
12V DC Power
BNC Video
Output
5