Table of Contents
Advertisement
WPS-500/750-PTZ-A Installation Manual
3.8. Outside Corner Mount
3.8.1. Mounting and Use Guidelines
•
The corner mount should be installed so that the edges are flush with the wall.
•
The mounting surface must be able to support the weight of the corner mount assembly and camera.
3.8.2. Assembly Instructions
1.
Assemble the wall mount ("3.3. Wall Mount Assembly" on page 9).
2.
Assemble the junction box accessory if it is being used.
3.
Attach the mounting accessories together using the correct hardware.
3.8.3. Mounting Instructions
1.
Use the bracket to mark the 4 mounting holes on the corner.
2.
Pre-drill the holes (and insert the anchors if using the included mounting hardware).
3.
Connect the wiring harness to the wiring. Use the wiring chart in section "3.2. Wiring Requirements" on page 8 for
reference.
4.
Secure the mount assembly to the corner.
5.
See section "3.10. Final Installation Instructions" on page 16 to complete installation.
14
Advertisement
Table of Contents
