Table of Contents
Advertisement
4.7.1.1. How to Add or Select a Preset ID
1.
Press "Iris +" ("OPEN") to enter the "NUMBER" sub-menu.
2.
Select an address from the list to be the ID of the new preset position. Use the joystick to select digits and press
"Iris +" ("OPEN") to make the selection.
3.
Press "Iris -" ("CLOSE") after selecting the number to return to the main preset menu.
4.
Move the cursor down to the "SET PRESET" option and press "Iris +" ("OPEN"). A cross-hair will appear on the
screen.
5.
Use the PTZ joystick to position the camera on the desired field-of-view and then press "Iris +" ("OPEN") to save the
location. "STORED" will flash on the screen when the setting is saved.
4.7.1.2. How to Call a Preset
1.
Select a preset ID to call in the "NUMBER" menu.
2.
Select "CALL PRESET" and press "Iris +" ("OPEN"). The camera will move to aim at the preset coordinates.
4.7.1.3. How to Delete Presets
1.
Select a preset ID for deletion in the "NUMBER" menu.
2.
Select "DELETE PRESET" and press "Iris +" ("OPEN") to delete the entry.
4.7.1.4. Naming Presets
1.
Select a preset ID to name.
2.
Press "Iris +" ("OPEN") to enter the "NAME" setup menu.
3.
Use the joystick to select characters and the "Iris +" ("OPEN") button to enter characters in the name field.
4.
Press "Iris -" ("CLOSE") once to exit character entry, then again to confirm the new name and return to the
previous menu.
5.
The "NAME DISPLAY" section will change automatically to "ON" after naming the camera.
6.
Press "Iris -" ("CLOSE") to return to the Display Options menu.
To disable the camera name, return to the menu and toggle the "NAME DISPLAY" field to "OFF".
© 2014 Wirepath Surveillance
WPS-500/750-PTZ-A Installation Manual
23
Advertisement
Table of Contents
