Table of Contents
Advertisement
WPS-500/750-PTZ-A Installation Manual
4.7. Function Programming Menu Overview
•
PRESET
Set up position coordinates with a number and name.
•
VECTOR SCAN
Set up preset paths for the camera to track for monitoring wide fields-of-view.
•
PATTERN
Set up to three patterns of movement to simulate manual operation. This can be used to set up paths of travel more
complex than with vector scans.
•
SECTOR SETUP
The sector feature allows assigned names to be displayed when the camera navigates through coordinates within the
assigned sector. This is useful for naming areas of the field of view. Both span and tilt limits can be set.
•
MASK ZONE
Mask areas of the camera field-of-view for privacy or security. (ONLY ACTIVE IN WPS-750-PTZ-A)
•
MASK COLOR
Set the mask color in "MASK ZONE" between gray, green, red, blue, black, or white. (ONLY ACTIVE IN WPS-750-PTZ-A)
•
MOTION
Set up park positioning, power on action, and limit operation to certain fields of view.
4.7.1. Preset Menu Overview
•
NUMBER
Preset ID number.
•
SET PRESET
Set new preset positions.
•
CALL PRESET
Set the camera to a defined preset position.
•
DELETE PRESET
Delete defined presets.
•
NAME _____________
Name a preset ID.
•
NAME DISPLAY
Select whether the name (if set above) is displayed.
22
Advertisement
Table of Contents
