Table of Contents
Advertisement
WPS-500/750-PTZ-A Installation Manual
4.3. Dome Information Menu Overview
Displays the following camera settings (cannot be changed in this menu):
•
CAMERA TYPE
Displays the brand of image sensor installed in the camera.
•
PROTOCOL
Pelco D or Pelco P, set using the camera dip switches.
•
BAUD RATE
Displays the baud setting currently in use for RS485 (default: 4800).
•
DOME ID (RS485 ID)
Displays the ID number currently in use for RS485.
•
SOFTWARE VERSION
Displays the current firmware loaded in the camera.
Press the "Iris -" ("CLOSE") button on the PTZ controller to return to the main menu.
4.4. Display Options Menu Overview
•
CAMERA NAME SETUP
Assign a display name so the camera location can be identified. See instructions in section "4.4.1. Camera Name
Setup Instructions" on page 18 (below).
•
COORDINATES
Current camera viewing position. Press left or right on the PTZ joystick to turn ON or OFF.
•
START UP MESSAGE
Appears when the camera is booted up. Press left or right on the PTZ joystick to turn ON or OFF.
•
CROSSHAIRS
Turn on the crosshairs in the center of the field of view to help aim the camera. Press left or right on the PTZ joystick to
turn ON or OFF.
4.4.1. Camera Name Setup Instructions
Name the camera according to its location or field-of-view for easy identification when viewing video.
1.
Highlight "Camera Name Setup" and press "Iris +" ("OPEN") to enter the sub-menu. The sub-menu provides 2 fields:
•
Name
_____________
•
Name Display (ON/OFF)
2.
Press "Iris +" ("OPEN") to enter the name setup menu.
3.
Use the joystick to select characters and the "Iris +" ("OPEN") button to enter characters in the name field.
4.
Press "Iris -" ("CLOSE") once to exit character entry, then again to confirm the new name and return to the previous
menu.
5.
The "Name Display" section will change automatically to "ON" after naming the camera.
6.
Press "Iris -" ("CLOSE") to return to the Display Options menu.
To disable the camera name, return to the menu and toggle the "Name Display" field to "OFF".
18
Advertisement
Table of Contents
