Table of Contents
Advertisement
WPS-500/750-PTZ-A Installation Manual
4.6. Camera Options (Main Setup)
•
SSDR
Samsung Super Dynamic Range optimizes lighting in the scene for an evenly-lit scene. The user has options for:
•
Adjusting the SSDR level; from 1 to 15
•
Dynamic Range; WIDE or NARROW
Highlight and press "Iris +" ("OPEN") on the RETURN option to go back to the previous page.
•
WHITE BAL
Adjust white balance settings. The user has options for:
•
ATW (Auto Tracing White Balance)
•
Manual; where RED and BLUE level may be adjusted from 1 to 1023
•
AWC->SET (Auto White Balance Control)
•
OUTDOOR
•
INDOOR
•
BACKLIGHT
Enable and configure backlight control or highlight control. The user has options for:
•
BLC; which may be set to LOW, MIDDLE, or HIGH.
•
HLC; which may be set to LOW, MIDDLE, or HIGH and Mask tone which may be adjusted from 1 to 15.
•
MOTION DET
Enable and configure up to 8 motion detection areas so that colored squares highlight the areas when and where
motion occurs. The user has options for:
•
Motion detection sensitivity; which may be set to LOW or HIGH.
•
Smart zoom; where the Start Zoom and Target Zoom may be adjusted from 1x to 12x for the WPS-500-PTZ-A and
from 1x to 37x for the WPS-750-PTZ-A.
•
Dwell time; which may be adjusted from 5 seconds to 60 seconds.
•
FOCUS
Allows the user to set focus modes AUTO, MANUAL, or ONE-PUSH. The user has options for:
•
ZOOM TRACK; which may be set to AUTOTRACK, TRACK, or OFF.
•
ZOOM SPEED; which may be set to FAST, SLOW, or MEDIUM.
•
D-ZOOM (Digital Zoom); which may be set up to 16x.
•
ZOOM POS INIT (Initial zoom position); which may be set to OFF, AUTO, or MANUAL (POS INIT from 1x to 12x for the
WPS-500-PTZ-A and from 1x to 37x for the WPS-750-PTZ-A).
•
USER PRESET; which may be saved and cleared.
•
LENS INIT (Lens initialization); which may be set to AUTO where the day of the week for lens initialization may be
selected or manual where the lens initialization is done immediately.
20
Advertisement
Table of Contents
