Table of Contents
Advertisement
GROUP BYPASS
1.
Press [BYPASS] [0] [BYPASS]. All zones that are designated as group
bypass zones will be bypassed.
2.
Press [BYPASS] again to exit group bypassing.
UNBYPASSING
To manually unbypass zones, perform the bypassing procedure on a zone that is
already bypassed. NOTE: All zones will automatically be unbypassed each time
the system is disarmed.
FUNCTION MENU
The functions listed below are found in the Function Menu.
1.
Press [r]. The display will now begin scrolling though a list of functions and
the corresponding numbers associated with those functions.
2.
Press the number listed on the display in order to access that particular
function. Hint: If you already know the function numbers simply press [r]
followed by the function number.
The following list of menu selections will scroll automatically. NOTE: Some of the
functions are not listed because they are installer level functions. The next menu
item will be displayed each time [r] is pressed. Press [#] to exit.
Select an Option
Press
ù=Zone Review
0=Set Tone
1=Chime
2=Service Check
3=Alarm Memory
44=Test
45=Display Test
LCD Keypad
for Help
46=Light Control
49=Español
5=User PIN
6=User Authority
7=Detector Reset
90=Log Review
91=View Settings
This is a sample of the display. The list
below reflects the available functions.
97=Set Date/Time
BYPASS=Walk Test
AWAY=Silent Exit
9
Advertisement
Table of Contents
