Other Keypad Functions; User Menu - GE NX-148E User Manual

OTHER KEYPAD FUNCTIONS

User menu

The LCD keypads /displays have a bilingual user's interface. As a result, you can simply select a user's
function on the menu. You can consult the menu by entering the [r] key.
To select a user's function following steps have to be performed.
Step 1 Enter the [r] key. The display will now begin scrolling through a list of functions and the
corresponding numbers associated with those functions.
ex.
Step 2 To select the option, you must press the key with the number next to the option (ex.
Consulting Log Review = option 90)
If you already know the option (ex. Log Review= 90) you can immediately select the wanted option by
pressing the [r] [9] [0] keys. By doing this you don't have to browse through the user's menu.
The following list of menu selections will scroll automatically.
NOTE: Some of the functions are not listed because they are installer level functions. Each time the [r] key is
pressed the next menu item will be displayed. To exit the user's menu, press the [#] key.
Option
0
1
2
3
41
42
43
44
45
46
49
5
6
7
90
91
97
Chime
EXIT
NX-148E User manual
Select an option
90 = journal
Description English (1)
Zone Review
Set Tone
Master Mode
Service Check
Alarm Memory
Telephone # 1
Telephone # 2
Telephone # 3
Test
Display test
Light Control
English (2)
User PIN
User Authority
Detector Reset
Log Review
View Settings
Set Date/Time
Walktest
Silent Exit
Page 15
g
GE Security
04/10/04