7B. Set Elapsed Time In Minutes Since Last Autotest; 7C. Set System Time And Date; 7D. Adjust Code Pad Tone - GE NetworX Series Installation And Setup Manual

7b. Set Elapsed Time in Minutes Since Last Autotest

Action
[program code]
(example only)
#

7c. Set System Time and Date

Action
[master code]
or
Repeat the last two steps until the entire time and date is set.

7d. Adjust Code Pad Tone

Action
to raise the tone
to lower the tone
#
NX-148E LCD Code Pad Installation and Setup Manual
Result
Prompts for a code.
Displays the elapsed time screen.
[100's digit] [10's digit] [1's digit]
Saves and exits.
Result
Prompts to 'Please Enter Your Code'.
Displays date and time with the current hour
flashing.
Scroll to select the current hour.
Advances to the selection for the minutes.
Result
Prompts to use the scroll keys (right of the display)
to raise or lower the tone.
The code pad will emit a continuous tone to allow
you to hear the current selection.
Saves the tone and exits the mode.
13