Download Print this page

Setting The Volume Of Tone Ringing; Setting The Frequency Of The Ringing Tone; Setting The Tone Ringing Melody; Setting Loudspeaker Volume - Siemens euroset User Manual

Hide thumbs

Advertisement

Table of Contents
19.04.2000
2015-EU1-eng.fm
euroset 2015, A31008-E2015-B100-2-Y719

Hearing and being heard

Setting the volume of tone ringing

There are 7 tone ringer volume settings (factory setting: 7).
>"
Setting while the telephone is in standby:
Lift the handset, then start the function.

The ringer sounds for checking purposes.
Press the plus or minus key.
or
"<
The volume increases or decreases each time a key
is pressed.
Press the set key, then replace the handset.

Setting while the phone is ringing:
Press one of the keys
or
The last value set is stored.

Setting the frequency of the ringing tone

>"
There are 3 settings for the frequency (speed) of tone ringing
(factory setting: 3).
Lift the handset, then start the function.
The ringer sounds for checking purposes .


Press one of the keys 1 ... 3:
"<
1
= Lowest frequency;
...
Press the set key, then replace the handset.

Setting the tone ringing melody

10 different melodies can be set for tone ringing (factory setting:
>"
melody 0).
Lift the handset, then start the function.
The current melody is played back for checking pur-


poses .
Press one of the keys 0 ... 9.
...
"<
The relevant melody is played back for checking pur-
poses .
Press the set key, then replace the handset.
Setting the loudspeaker volume
With the loudspeaker on, you can choose from 7 volume levels during a

call.
Press the plus or minus key.
or
The volume increases or decreases each time a key
is pressed.
before lifting the handset.
3
= Highest frequency.
– 6 –
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Euroset 2015