Figure 27-10 Ethernet Flow Control; Figure 27-11 Ethernet Monitor Status; Figure 27-12 Enet Monitor Statistics - ZyXEL Communications IES-2000 User Manual

IES-2000/3000 User's Guide
27.3.4 Enet Fctrl Command
Syntax:
vdsl enet fctrl chan-id (lt|nt) [on|off]
Type this command to set the Ethernet port flow control. By default, flow control is on for full duplex Ethernet
connections and off for half duplex Ethernet connections.
27.3.5 Enet Monitor Command
vdsl enet monitor chan-id [on|off]
When this flag is on, this command automatically displays the VLC1012 Ethernet statistics every five seconds
(and those of the subscriber's VDSL modem if the link is up).
>vdsl enet mon vdsl02 on
vlc1012> 108:Enet(LT):Tx(F:0 B:0 S:0) Rx(F:681 B:85833 S:1950)
109:Enet(NT):Tx(F:694 B:90140 S:2709) Rx(F:0 B:0 S:0)
113:Enet(LT):Tx(F:0 B:0 S:0) Rx(F:815 B:117449 S:6323)
114:Enet(NT):Tx(F:828 B:119529 S:5877) Rx(F:0 B:0 S:0)
118:Enet(LT):Tx(F:0 B:0 S:0) Rx(F:876 B:125667 S:1643)
119:Enet(NT):Tx(F:884 B:126557 S:1405) Rx(F:0 B:0 S:0)
123:Enet(LT):Tx(F:0 B:0 S:0) Rx(F:934 B:134174 S:1701)
124:Enet(NT):Tx(F:943 B:134941 S:1676) Rx(F:0 B:0 S:0)
128:Enet(LT):Tx(F:0 B:0 S:0) Rx(F:980 B:138422 S:849)
vlc1012> vdsl enet mon off
129:Enet(NT):Tx(F:989 B:139256 S:863) Rx(F:0 B:0 S:0)
27-12
Table 27-7 Ethernet Speed Parameters
SPEED INDEX NUMBER
0
1
2
3
4
vlc1012> vdsl enet fctrl vdsl02
enet flow control(LT): on

Figure 27-10 Ethernet Flow Control

vlc1012> vdsl enet monitor vdsl02
enet monitor flag: off

Figure 27-11 Ethernet Monitor Status

Figure 27-12 Enet Monitor Statistics

SPEED/FLOW CONTROL
Auto Negotiation
10 Mbits/s, Half Duplex
10 Mbits/s, Full Duplex
100Mbits/s, Half Duplex
100Mbits/s, Full Duplex
VDSL-Related Commands