Table of Contents
Advertisement
IES-2000/3000 User's Guide
Figure 16-1 BOOTP/TFTP Server
3.
The Input Box window will pop up as shown next. Type the MAC address of the line card and then
click OK. You can find the MAC address of the line card on its boot console.
Figure 16-2 Input MAC
4.
Type the host IP address (the IP address you want to assign to the line card), server IP address (the
IP address of this computer), net mask, gateway and filename (the new firmware name) into the
appropriate fields in the screen shown next. Click Update Database.
Firmware Upload and Recovery
16-3
Advertisement
Table of Contents
Troubleshooting
