Table of Contents
Advertisement
3.1
Additional Installation Requirements
•
A computer with Ethernet 10Base-T or 100Base-TX NIC (Network Interface Card)
•
WAN service provided by a local phone company
3.2
Front Panel
The following figures show the front panels of the IES-2000 and IES-3000 main chassis and splitter chassis with
installed line and splitter cards.
Install the main chassis and splitter chassis in a rack with the splitter chassis directly below the
To avoid the risk of electric shock, remove only one card at a time and do not place fingers or
objects inside the chassis. Cover empty slots with slot covers.
To avoid injury, remove all metal jewelry, watches, and so on from your hands and wrists before
Install the EEC1020 in slot 1 on the IES-2000 and slot 8 or 9 on the IES-3000.
Install the cards starting from the bottommost (IES-2000) or the leftmost (IES-3000) slot.
Use the fan module handles when pulling out or pushing in the fan module. Be careful not to put
Hardware Overview
This chapter gives a brief introduction to the IES-2000/3000 hardware.
main chassis.
Warning!
Warning!
servicing this device.
Fan Module Warning!
fingers or objects inside the fan module.
IES-2000/3000 User's Guide
Hardware Overview
Chapter 3
3-1
Advertisement
Table of Contents
Troubleshooting
