Table 24-7 System Maintenance Menu Diagnostic - ZyXEL Communications IES-2000 User Manual

IES-2000/3000 User's Guide
Follow the procedures next to get to Menu 24.4 – System Maintenance – Diagnostic.
From the main menu, enter 24 to open Menu 24 – System Maintenance.
Step 1.
From this menu, enter 4. This will open Menu 24.4 – System Maintenance – Diagnostic.
Step 2.
The following table describes the diagnostic tests available in menu 24.4 for your VLC1012 and the connections.
MENU OPTION
TCP/IP
1 Ping Host
System
11 Reboot System
Port
21 Reset Port
22 Local Loop
Back Test
23 Remote Loop
Back Test
VDSL
31 Update Remote
Firmware
32 Reconnect
Host IP
Address
Port Number
24-12

Table 24-7 System Maintenance Menu Diagnostic

FIELD
Enter 1 to ping any machine (with an IP address). Enter its IP address in
the Host IP Address field below.
Enter 11 to reboot the VLC1012.
Enter 21 and then the port number in the Port Number field below to reset
the port.
Use these loop back tests to determine if there's a problem with the
VLC1012 or the telephone line to the VDSL modem. Enter 22 and then the
port number in the Port Number field below to do a local (internal to the
switch) loop back test.
Enter 23 and then the port number in the Port Number field below to do a
remote (from the switch to the VDSL modem) loop back test.
Enter 31 to manually update the subscriber's VDSL modem firmware; you
may also do this automatically in SMT menu 2.
Enter 32 to drop and bring up the VDSL connection. You may do this if you
are experiencing problems with a subscriber's VDSL connection.
If you entered 1 above, then enter the IP address of the machine you want
to ping in this field.
If you entered 21, 22 or 23 above, then enter the port number in this field.
DESCRIPTION
System Maintenance 1