Figure 11-6 Example: Dvlan List Command Display; Figure 11-7 Example: Dvlan Getentry 2 Command Display - ZyXEL Communications IES-2000 User Manual

vid 01
---- ----
2 ||
3 >>
4 >>
5 ||
6 >>
7 ||
8 >>
9 ||
In the figure above, "||" denotes "filter" and ">>" denotes "forward".
11.6.11 DVLAN Getentry Command
Syntax:
192.168.1.1 vlan1q> dvlan getentry <vid>
where
<vid> =
This command displays an entry with a specified VLAN ID in dynamic GVRP table.
Display a Dynamic VLAN Table Entry Example
The following figure is an example display of the following command.
192.168.1.1 vlan1q> dvlan getentry 2
vid 01
---- ----
2 ||

Figure 11-7 Example: DVLAN Getentry 2 Command Display

In the figure above, "||" denotes "filter" and ">>" denotes "forward".
11.6.12 VLAN List Command
Syntax:
192.168.1.1 vlan1q> vlan list
This command displays the entire VLAN table. The display refreshes periodically. Press [ENTER] and then
enter the stop command to stop the display from refreshing. The following figure is a partial example what is
displayed when you use this command (there would be 25 port numbers with a 24 port DSL card).
IEEE 802.1Q Tagged VLAN Commands
02 03
---- ---- ----
>> ||
>> ||
|| ||
>> ||
>> ||
>> ||
|| ||
>> ||

Figure 11-6 Example: DVLAN List Command Display

VLAN ID. Valid parameter range = [1 – 4094].
02 03
---- ----
>> ||
04 05 06
---- ----
|| >> >>
|| || >>
>> >> ||
|| >> >>
|| || >>
>> >> ||
>> || >>
|| || >>
04 05
---- ---- ----
|| >>
IES-2000/3000 User's Guide
07 08
---- ----
|| ||
>> >>
|| >>
|| ||
>> >>
|| >>
>> >>
|| >>
06 07 08
---- ----
>> || ||
09
----
>>
||
>>
>>
||
>>
>>
>>
09
----
>>
11-11