Table of Contents
Advertisement
IES-2000/3000 User's Guide
Temperature(C)
TEMP1
TEMP2
TEMP3
Voltage(V)
2.0
2.5
3.3
5.0
15.0
-5.0
FIELD
Temperature (C)
There are three temperature sensors inside the VLC1012. Each sensor is
capable of detecting and reporting if the temperature rises above the
threshold. Temp 1 refers to the first temperature sensor and has a threshold
of 75 degrees centigrade, the second and third temperature sensors have
thresholds of 65 degrees centigrade.
Current
This shows the current temperature in degrees centigrade at this sensor.
Max
This field displays the maximum temperature measured at this sensor.
Min
This field displays the minimum temperature measured at this sensor.
Threshold
This field displays the upper temperature limit at this sensor.
Status
This field displays "Normal" for temperatures below the threshold.
Voltage (V)
The power supply for each voltage has a sensor that is capable of detecting
and reporting if the voltage falls out of the tolerance range.
Current
This is the current voltage reading.
Max
This field displays the maximum voltage measured at this point.
Min
This field displays the minimum voltage measured at this point.
Tolerance (%)
Ten percent is the acceptable deviation a voltage of 2.0. Five percent is the
acceptable deviation from the other nominal voltages.
Status
"Normal" indicates that the voltage is within an acceptable operating range at
this point.
COMMANDS:
26-6
Menu 24.12 — Hardware Monitor
Current
Max
35.0
32.5
43.0
Current
2.06
2.61
3.31
5.06
14.53
15.02
-5.15
-5.15
Press Command:
COMMANDS:r-Reset status
Figure 26-6 Menu 24.12 - Hardware Monitor
Table 26-5 Menu 24.12 - Hardware Monitor
DESCRIPTION
Min
Threshold
37.0
34.0
75.0
35.5
30.0
65.0
46.0
40.5
65.0
Max
Min
Tolerance(%)
2.11
2.02
10
2.62
2.58
5
3.36
3.30
5
5.15
4.99
5
14.35
5
-5.25
5
ESC-exit
Status
Normal
Normal
Normal
Status
Normal
Normal
Normal
Normal
Normal
Normal
EXAMPLE
Temp1
35.0
37.0
34.0
65.0
Normal
V2.0
2.03
5%
Normal
System Maintenance 2
Advertisement
Table of Contents
Troubleshooting
