Table of Contents
Advertisement
This chapter shows you how to configure your VLC1012 using switch-related commands.
28.1 Overview
The following table is an overview of the MIB, port and VLAN switch-related CI commands.
Table 28-1 MIB, Port and VLAN Switch Command Summary
COMMAND
sw mib status
Use this command to see the port n mib counters.
sw mib clear
Use this command to clear port n of mib counters.
sw port status
Use this command to see the link status of all ports.
sw vlan status
Use this command to view all VLAN settings.
sw vlan set
Use this command to set port(s) x1, x2, etc. to be the egress
port(s) (outgoing ports) for port "n".
sw vlan clear
Use this command to clear the VLAN setting of port n.
28.2 Switch MIB Commands
The following are the most common MIB CI commands.
28.2.1
MIB Status Command
Syntax:
sw mib status n
This command allows you to view the MIB of port
Switch-Related Commands
Switch-Related Commands
DESCRIPTION
sw mib status 13
where
is a port number.
n
n
Displays the MIB of port 13 as follows:
IES-2000/3000 User's Guide
Chapter 28
EXAMPLE
sw mib status n
sw mib clear n
sw port status
sw vlan status
sw vlan set n, x1, x2
sw vlan clear n
28-1
Advertisement
Table of Contents
Troubleshooting
