Fcc Compliance Statement; Industry Canada Compliance Statement - Matrox Digidesktop Installation Manual And User's Manual

FCC compliance statement

Warning
Changes or modifications to this unit not expressly approved by the party responsible for the
compliance could void the user's authority to operate this equipment.
The use of shielded cables for connection of the monitor to the card is required to meet FCC
requirements.
Note
This device complies with Part 15 of FCC Rules. Operation is subject to the following two
conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his or her own
expense.
Grounding information
If this device is connected to a CATV system, please ensure that proper grounding guidelines
are followed. Specifically, the cable ground should be connected to the grounding system of the
building as close to the point of cable entry as practical. Consult the relevant code entries for
your area such as Art. 820-40 of the National Electrical Code (NEC).

Industry Canada compliance statement

This digital apparatus does not exceed the Class A limits for radio noise emission from digital
apparatus set out in the Industry Canada Radio Interference Regulation.
Le présent appareil numérique n'émet aucun bruit radioélectrique dépassant les limites
applicables aux appareils numériques de Classe A prescrites dans le Règlement sur le brouillage
radioélectrique édicté par Industrie Canada.
Compliance Statements
iii