Matrox Digidesktop Installation Manual And User's Manual page 38

28
Chapter 4, Configuring DigiDesktop
select a window on Monitor B, the original window will disappear
from Monitor A and a new one will appear on Monitor B.
q
Source Use this list to assign a particular video source to the
currently selected video window. For example, to assign the video
source you selected in the
Window 1 on Monitor A, select
from the list.
Source
Note If your DigiDesktop is connected to one or more other cards with
a Movie-2 bus, you can select
Preview to assign the Main or Preview output from the Movie-2 bus as
your video window source. For example, if you're using DigiDesktop
with DigiMix, you can select
output from DigiMix. This feature, however, is supported only by
programs that are configured to use the Movie-2 bus Main or Preview
output.
q
Proc Amp Settings
controls to adjust the proc amps of the currently selected video
window. For a description of each control, see
DigiDesktop Input A
under
1 Mon. A
Movie-2 Bus Main
Movie-2 Bus Main
Use the ,
Hue Chroma
dialog box to
, then select
Input A
or
Movie-2 Bus
to display the Main
, , and
Level Setup
page 26.