Configuring The On-Screen Video Windows - Matrox Digidesktop Installation Manual And User's Manual

Configuring the on-screen video windows

q
Source has Built-in TBC
stable and broadcast-quality. This allows DigiDesktop to reproduce the
input signal as-is, without degradation.
If your source device doesn't have a time base corrector or meet
broadcast-quality standards, make sure this option isn't selected.
DigiDesktop will then filter the signal to increase the tolerance for sync
pulse instability.
To configure the DigiDesktop on-screen video windows, click the
DigiDesktop tab, then the
q
Window Selection
Monitor B), select the video window you want to configure.
–
Select this option if you want the configuration changes
Apply to all
you make to apply to all four video windows (Window 1 will be the
only available selection). To make changes individually to each
window, you must clear
q
2 Fields/Frame
video windows. This option allows only one video window to be
displayed per monitor.
q
Display Window
video window's proc amp settings, select
window will appear on the appropriate monitor. For example, if you
adjust the proc amp settings for a window on Monitor A, and then
Select this option if your input signal is
Output tab.
Under or
Mon. A
Apply to all
Select this option to display both video fields for all
To preview the effect of making adjustments to a
Configuring the on-screen video windows
(that is, Monitor A or
Mon. B.
.
. The video
Display Window
27